NICKEL 200/201 NUTS:

DC is the world’s populist manufacturer and supplier of Nickel 200/201 Nuts to all over the world. We provide various shapes and sizes of fasteners, for our valued customers. We have quality assurance and quality control both as well for highest satisfaction to our customers.

Nickel 200 Nuts offers good weldability and corrosion resistance from various atmospheres including pitting and crevice corrosion. Due to the high ductility, and toughness this grade is widespread fasteners across all different applications. Nickel 201 Nuts is also a good grade of nickel steel for low environmental conditions as much as -450 degree Fahrenheit, and low magnetic permeable atmosphere as well. Nickel 201 nuts is generally used at the temperature range from 1150-1035 degree celsius in the constant functioning environment to intermittent operations depending upon once one needs. Nickel 200 Nuts offers greater corrosion resistance, and annealing is usually done at 1900 degree fahrenheit, followed by rapid cooling. The general hot working that is performed by Nickel 200/201 Nuts is done after the continuous heating at the temperature of 1177 degree celsius.

We use Nickel 200 and 201 Fasteners in high speed steel tooling that equates to about 70 surface/min due to forming operations that should be performed under the room temperature at any time. For fasteners heat rejection copper back-up plates are functional, nevertheless to prevent cracks in the solder metal Nickel 200 nuts strictly do not permit surface-fuse the copper back up plate for better results.

Nickel Alloy 201 / 200 NUTS Specification

Specifications	DIN, ISO ,JIS ,GB, IS, BS, ASTM
Standard	ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472
Size	M0.2 to M33 \| 3/6" to 2" \| Custom Sizes
Length	3 mm to 200 mm \| Custom Sizes
Dimensions	DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3
Form	Hex, Threading, Square, Round as per Gauge Etc.
Threads	Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically
Threads available	UNF, BSW, BSF, METRIC, UNC, or as required
Threads Configuration	ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Certification	Dual Certified As per ASTM & ASME Codes
Test Certificate	As per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
Raw materials Source	JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc.
Packing	IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request
Surface Coating	Cadmium Coating Hot Dipped Galvanizing Coating Ptfe Coated Nickel Alloy 200 Fasteners Phosphate Coating Teflon Coating Xylon Coating Zinc Coating

Equivalent Grades

STANDARD	UNS	WERKSTOFF NR.	AFNOR	EN	JIS	BS	GOST
Nickel 200	N02200	2.4066	N-100M	Ni 99.2	NW 2200	NA 11	НП-2
Nickel 201	N02201	2.4068	-	LC-Ni 99	NW 2201	NA 11	НП-2

Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni
Nickel 200	0.15 max	0.35 max	0.35 max	0.01 max	0.25 max	0.40 max	99.0 min
Nickel 201	0.02 max	0.35 max	0.35 max	0.01 max	0.25 max	0.40 max	99.0 min

Mechanical Properties

Grade	Tensile Strength	Elongation (% in 50mm)	Yield Strength (0.2%Offset)	Melting Point
Nickel 200	Psi – 67000, MPa – 462	45 %	Psi – 21500, MPa – 148	1446 °C (2635 °F)
Nickel 201	Psi – 67000, MPa – 462	45 %	Psi – 21500, MPa – 148	1446 °C (2635 °F)

Nickel 200/201 NUTS